Our award winning ENG Threaded bottom bracket is designed for use with a BSA threaded frame. It comes in 8 different colors and can support 24mm cranks such as Shimano and FSA. The ENG BB can be used with 22/24mm SRAM GXP/Truvativ cranks with the addition of our adapter kit (select SRAM crank below).
The Integrated BB 86/92 was designed to combine the BB86 and the BB92 into one easy to use bottom bracket. This system uses a pressfit cup that brings the final width of the system equal to threaded systems. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA, and can be used with an adapter for…
The BB90 Madone was designed to be used in high-end Trek bicycle frames (2008 and newer) and some Gary Fisher bicycles. This bottom bracket is an internal, bearings only system so it fits completely within the frame shell. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA; and they can be used with an adapter…
The BB30.24 is an adapter that allows the use of a 24mm crankset spindle without the use of external cups. This adapter fits a BB30 frame and reduces the diameter to work with cranksets such as the Shimano Hollowtech II and FSA MegaExo. It can be used with a SRAM GXP with the addition of our adapter (select SRAM crank…
Hawk Racing’s SRAM adapter is designed to use a SRAM 22/24mm crankset with any 24mm bottom bracket. The adapter presses into the 24mm bearing on one side to modify the inner diameter from 24mm to 22mm.
The Pressfit 30 bottom bracket is designed to fit PF30 frames and it has been redesigned without the sleeve attached to one cup; reducing the weight by 18g. Installed are Folmer TechnologyTM bearings that support 30mm crank sets such as SRAM, RaceFace, and FSA.
The Pressfit 30.24 bottom bracket is designed to fit Pressfit 30 (PF30) frames and allow the use of 24mm spindle cranksets such as Shimano and FSA. This bottom bracket can also be used with 22/24mm spindles such as SRAM GXP when used with our SRAM adapter kit (select SRAM crank below).
The 386EVO 24 bottom bracket is not an adapter. It is a bottom bracket specifically designed for EVO386 frames using a 24mm spindle such as Shimano and FSA. This results in low friction for your EVO386 at only 84g for the bottom bracket. It can also be used with a 22/24mm spindle such as SRAM GXP with our SRAM adapter…
The ITL Threaded bottom bracket has been designed to fit frames where the threading is in Italian style such as Pinarello. The cups contain 24mm bearings which will support 24mm cranksets such as Shimano and FSA, but can be used with a 22/24mm crankset such as the SRAM GXP )select SRAM crank below).
White Lightening has developed Crystal Grease for cyclists and mechanics who are simply unwilling to compromise on performance or ecology. An aluminum based thickening system makes Crystal Grease 100% waterproof, perfect for wet weather rides or stream crossings.
The BB.ENG.3086 bottom bracket is designed to be used with BB30* cranks that have a longer spindle than standard BB30 crank sets. This is also known as a BSA 30 or BB386 bottom bracket. It comes with a 3086 installation tool to make your life easier!
Hawk Racing’s 19mm bushings are two adapters made from Alloy 7075 and designed to lower the inner diameter of our bottom brackets from 24mm to 19mm for 19mm cranks.
The BBrght Pressfit 46/24 bottom bracket is designed to be used on BBright frames such as the Cervelo R3, R5, S5. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA; but can be used with an adapter for SRAM 22/24mm cranksets (select SRAM crank below).
Use this brake pad on full carbon fiber braking surfaces such as the Hawk Racing carbon wheel set line. Combines stopping performance and durability of a synthetic polymer with the heat resistance and smooth feel.
The BBS was designed to work with Specialized Carbon OSBB frames, such as the Tarmac and Venge frames. Its pre-installed bearings are compatible with 24mm crankset spindles such as Shimano and FSA. It can be used with a SRAM GXP with the addition of our adapter (select SRAM crank below).
The Pressfit 30.D bottom bracket is designed to fit PF30 frames. This bottom bracket comes with an integrated alloy center tube and a 4.5mm spacer for the crank arms. Installed are Hawk RacingTM bearings that support 28.99mm crank sets such as DUB.
Hawk Racing valve extensions are available in 2 different sizes and come standard with all our wheels. They are black 3mm hex key barrel with the Hawk Racing logo on the side. The 48mm valve extenders are 2g each and the 72mm extenders are 3g each. They also have a special head to hold a pump easily. Valve extenders are…
Show how much you love Hawk Racing with this cycling jersey made with Body Cool Technology by AirpassTM. Body Cool Technology aids in body temperature and humidity regulation by using a unique fabric design that pulls air in from outside and brings sweat immediately to the surface for quick drying. It comes with 3 rear pockets and a rear reflective…
Designed for freehubs, Dumonde Tech Freehub Grease is used during servicing our Hawk Racing freehubs. The grease performs consistently throughout a wide temperature range and should be in any cyclists’ workbench.