• ENG Threaded Bottom Bracket ENG Threaded Bottom Bracket Quick View
    • ENG Threaded Bottom Bracket ENG Threaded Bottom Bracket Quick View
    • ENG Threaded Bottom Bracket
    • $129.00$176.00
    • Our award winning ENG Threaded bottom bracket is designed for use with a BSA threaded frame. It comes in 8 different colors and can support 24mm cranks such as Shimano and FSA. The ENG BB can be used with 22/24mm SRAM GXP/Truvativ cranks with the addition of our adapter kit (select SRAM crank below).
    • Select
  • DP – SHIMANO DP – SHIMANO Quick View
  • BB86/92 BB86/92 Quick View
    • BB86/92 BB86/92 Quick View
    • BB86/92
    • $129.00$175.00
    • The Integrated BB 86/92 was designed to combine the BB86 and the BB92 into one easy to use bottom bracket.  This system uses a pressfit cup that brings the final width of the system equal to threaded systems. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA, and can be used with an adapter for…
    • Select
  • BB90/BB90-Madone Quick View
    • BB90/BB90-Madone Quick View
    • BB90/BB90-Madone
    • $89.00$135.00
    • The BB90 Madone was designed to be used in high-end Trek bicycle frames (2008 and newer) and some Gary Fisher bicycles. This bottom bracket is an internal, bearings only system so it fits completely within the frame shell. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA; and they can be used with an adapter…
    • Select
  • DP – SRAM DP – SRAM Quick View
  • BB30 Quick View
  • BB30 for 24mm BB30 for 24mm Quick View
    • BB30 for 24mm BB30 for 24mm Quick View
    • BB30 for 24mm
    • $129.00$175.00
    • The BB30.24 is an adapter that allows the use of a 24mm crankset spindle without the use of external cups. This adapter fits a BB30 frame and reduces the diameter to work with cranksets such as the Shimano Hollowtech II and FSA MegaExo. It can be used with a SRAM GXP with the addition of our adapter (select SRAM crank…
    • Select
  • SRAM Adapter Quick View
    • SRAM Adapter Quick View
    • SRAM Adapter
    • $10.00
    • Hawk Racing’s SRAM adapter is designed to use a SRAM 22/24mm crankset with any 24mm bottom bracket. The adapter presses into the 24mm bearing on one side to modify the inner diameter from 24mm to 22mm.
    • Select
  • Pressfit 30 Pressfit 30 Quick View
    • Pressfit 30 Pressfit 30 Quick View
    • Pressfit 30
    • $139.00$188.00
    • The Pressfit 30 bottom bracket is designed to fit PF30 frames and it has been redesigned without the sleeve attached to one cup; reducing the weight by 18g. Installed are Folmer TechnologyTM bearings that support 30mm crank sets such as SRAM, RaceFace, and FSA.
    • Select
  • Pressfit 30 for 24mm Pressfit 30 for 24mm Quick View
    • Pressfit 30 for 24mm Pressfit 30 for 24mm Quick View
    • Pressfit 30 for 24mm
    • $129.00$175.00
    • The Pressfit 30.24 bottom bracket is designed to fit Pressfit 30 (PF30) frames and allow the use of 24mm spindle cranksets such as Shimano and FSA. This bottom bracket can also be used with 22/24mm spindles such as SRAM GXP when used with our SRAM adapter kit (select SRAM crank below).
    • Select
  • 386EVO for 24mm Quick View
    • 386EVO for 24mm Quick View
    • 386EVO for 24mm
    • $129.00$175.00
    • The 386EVO 24 bottom bracket is not an adapter. It is a bottom bracket specifically designed for EVO386 frames using a 24mm spindle such as Shimano and FSA. This results in low friction for your EVO386 at only 84g for the bottom bracket. It can also be used with a 22/24mm spindle such as SRAM GXP with our SRAM adapter…
    • Select
  • ITL Threaded Quick View
    • ITL Threaded Quick View
    • ITL Threaded
    • $129.00$175.00
    • The ITL Threaded bottom bracket has been designed to fit frames where the threading is in Italian style such as Pinarello. The cups contain 24mm bearings which will support 24mm cranksets such as Shimano and FSA, but can be used with a 22/24mm crankset such as the SRAM GXP )select SRAM crank below).
    • Select
Close Menu
×

Cart