fbpx

Archives: Products

ENG Threaded Circle

ENG Threaded Bottom Bracket

Our award winning ENG Threaded bottom bracket is designed for use with a BSA threaded frame. It comes in 8 different colors and can support 24mm cranks such as Shimano and FSA. The ENG BB can be used with 22/24mm SRAM GXP/Truvativ cranks with the addition of our adapter kit (select SRAM crank below).

Read More »
DP - SHIMANO-0

DP – SHIMANO

The Shimano 10/11 Speed Derailleur pulleys are designed to be used with any 10/11 speed non-SRAM groupset. Available in red or black.

Read More »
BB86/90/92-0

BB86/90/92

The Integrated BB 86/90/92 was designed to combine the BB86/92 and the BB90 into one easy to use bottom bracket.  This system uses a pressfit cup that brings the final width of the system equal to threaded systems. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA, and can be used with an adapter for SRAM 22/24mm cranksets (select SRAM crank below). 

Read More »
BB90 Madone-0

BB90/BB90-Madone

The BB90 Madone was designed to be used in high-end Trek bicycle frames (2008 and newer) and some Gary Fisher bicycles. This bottom bracket is an internal, bearings only system so it fits completely within the frame shell. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA; and they can be used with an adapter for SRAM 22/24mm cranksets (select SRAM crank below).

Read More »
BB30-0

BB30

  • Works with BB30 frames and cranksets
  • Internal bearings only system
  • Compatible with a 30mm spindle
Read More »
SRAM Derailleur Pulleys

DP – SRAM

Our SRAM Derailleur pulleys are designed to be used with any SRAM 10 or 11 speed groupset. Available in red or black.

Read More »
BB30 Pressfit-0

BB30 Pressfit

The BB30 Pressfit is designed to fit PF30 frames and it has been redesigned without the sleeve attached to one cup; reducing the weight by 18g. Installed are Folmer TechnologyTM bearings that support 30mm crank sets such as SRAM, RaceFace, and FSA.

Read More »
SRAM Adapter-0

SRAM Adapter

Hawk Racing’s SRAM adapter is designed to use a SRAM 22/24mm crankset with any 24mm bottom bracket. The adapter presses into the 24mm bearing on one side to modify the inner diameter from 24mm to 22mm.

Read More »
BB30.24-0

BB30.24

The BB30.24 is an adapter that allows the use of a 24mm crankset spindle without the use of external cups. This adapter fits a BB30 frame and reduces the diameter to work with cranksets such as the Shimano Hollowtech II and FSA MegaExo. It can be used with a SRAM GXP with the addition of our adapter (select SRAM crank below). 

Read More »
19mm Bushings-0

19mm Bushings

Hawk Racing’s 19mm bushings are two adapters made from Alloy 7075 and designed to lower the inner diameter of our bottom brackets from 24mm to 19mm for 19mm cranks.

Read More »
BB30 Pressfit 24-0

BB30 Pressfit 24

The BB30 Pressfit 24 bottom bracket is designed to fit BB30 Pressfit (PF30) frames and allow the use of 24mm spindle cranksets such as Shimano and FSA. This bottom bracket can also be used with 22/24mm spindles such as SRAM GXP when used with our SRAM adapter kit (select SRAM crank below).

Read More »
BBright Pressfit 46/24-0

BBright Pressfit 46/24

The BBrght Pressfit 46/24 bottom bracket is designed to be used on BBright frames such as the Cervelo R3, R5, S5. The bearings are compatible with a 24mm crankset spindle such as Shimano and FSA; but can be used with an adapter for SRAM 22/24mm cranksets (select SRAM crank below). 

Read More »
Close Menu
×

Cart